Machine Design – Calculations, 3D Model and Fabrication Drawings
SLETEC offers machine design for special purpose machines, handling equipment, test rigs and production fixtures, taking a functional requirement to a 3D assembly, calculations and a full set of part drawings. Workshops and plant owners use this when no standard machine fits the task.
We design special purpose machines, frames, jigs and fixtures, with 3D models, calculations and manufacturing drawings for your workshop.
Also searched as: special machine, machine drawing.
Last updated:
Request Engineering Support
Typical response within 24 hours · Confidentiality assured
What we deliver
Send us your data sheet, sketch or old drawing on WhatsApp (+966 55 545 8298) or email (enquiry@sletec.com) for a fixed-price quote, usually within 24 hours.
Inputs for custom machine design
A good specification saves redesign later. We ask what the machine must do, how fast and how often, and what the operator must be able to reach.
Where requirements are unclear, we write a short design specification for your approval before modelling starts.
- Task, cycle time and required throughput
- Part sizes, weights and tolerance on positioning
- Power available: electric, hydraulic or pneumatic
- Duty: hours per day and expected service life
- Space limits, operator access and maintenance needs
- Preferred bought-out brands for motors, bearings, gearboxes and controls
Design checks and the standards behind them
Each driven component gets a calculation, and the overall machine is reviewed for operator safety.
| Standard | What it governs |
|---|---|
| ISO 12100 | Risk assessment and risk reduction for machinery |
| ISO 13857 | Safety distances to keep hands and arms away from hazard zones |
| ISO 281 | Rolling bearing rating life |
| AGMA / ISO 6336 | Gear strength and durability |
| Shaft fatigue method (Goodman or similar) | Shaft sizing under combined bending and torsion with stress concentrations at keyways and shoulders |
| AISC 360 / EN 1993 | Welded or bolted machine frame strength |
Machine frame design
Frames are designed for stiffness first and strength second. A frame that is strong enough but flexible will let shafts misalign and bearings run hot. We check deflection under the working loads, the natural frequency against motor and gearbox speeds, and the weld details at highly loaded joints. FEA is used where the frame shape makes hand checks unreliable.
Deliverables and how the job runs
We start with a concept layout for your agreement, then develop the 3D assembly, calculations, part drawings, assembly drawings and a bill of materials split into make and buy items. More detail is on our machine design service page and the fabrication BOM package project.
Problems we see on existing machines
Clients often bring us machines that were built without drawings, where a shaft keeps breaking at a keyway, a frame cracks at a welded corner or guards were removed because they blocked maintenance. We trace the cause, recalculate the affected parts and issue corrected drawings, so the fix lasts and the machine is documented for future spares.
Related engineering topics
mechanical design services, skid design, skid base frame design and machine design services.
Frequently Asked Questions
Can you design a machine for our project?
Yes. We prepare calculations and drawings to ISO, AGMA, ASME and your project specification.
Do you take small jobs?
Yes. Single drawings, one calculation or a check of an existing design are welcome.
Which countries do you serve?
Saudi Arabia, UAE, Qatar, Oman, Kuwait, Bahrain and worldwide.
Related pages
Serving all GCC countries
Send your sketch, photo or PDF today
One drawing or a complete design package — we reply with a fixed-price quote, usually within 24 hours.
Request Engineering Support
Typical response within 24 hours · Confidentiality assured