Steel Platform and Staircase Design – Calculations, 3D Model and Fabrication Drawings
SLETEC delivers platform and staircase design for access to valves, instruments, vessels and tank roofs, with steel members, grating, stair geometry and guarding checked against the safety rules that apply on your site.
We design operating platforms, staircases, cage ladders, handrails and walkways with calculations and shop drawings, from one small platform to a full plant.
Also searched as: steel stairs, ladder, handrail, walkway.
Last updated:
Request Engineering Support
Typical response within 24 hours · Confidentiality assured
What we deliver
Send us your data sheet, sketch or old drawing on WhatsApp (+966 55 545 8298) or email (enquiry@sletec.com) for a fixed-price quote, usually within 24 hours.
Inputs for steel staircase design
Access steel is driven by what operators need to reach and how often. We start from the equipment layout and the list of valves, instruments and manways that need access, then fix platform elevations and stair routes.
If the platform is attached to a vessel or tank, the clip locations and the loads on the shell are agreed with the equipment designer.
- Elevations to be reached and the items needing access
- Live load required by the client specification, plus any equipment or maintenance loads
- Free-standing structure or clips on existing equipment
- Grating type, finish and corrosion protection
- Applicable safety rules: OSHA, ISO 14122 or the client standard
Handrail design, ladder design and governing rules
Guarding and access geometry are set by safety regulations, while member strength comes from the structural code.
| Code or rule | What it governs |
|---|---|
| AISC 360 | Beams, columns, bracing and connections |
| OSHA 1910 Subpart D | Stair angle, riser and tread, guardrail height and strength, fixed ladder geometry and fall protection |
| ISO 14122 | Permanent access to machinery on European-standard projects |
| Client specifications | SAES or company standards for platform loading, stair width and ladder use |
What the drawings show
We issue a general arrangement, framing plans, stair and ladder details, handrail and toe plate details, grating layout with clip positions and a bill of materials. Connection details are drawn so the workshop can cut and drill without further questions.
Problems on existing access steel
Common findings include stairs that are too steep, uneven risers on a modified flight, handrails that fail the top-rail load test, and cage ladders on long climbs where current OSHA rules call for a ladder safety system instead. Corroded grating clips and missing toe plates also appear often. See our steel platform design service and structural platform FEA project.
How an access steel job runs
We mark up the equipment layout with platform elevations and stair routes and send it for operator review before any member is sized. After the layout is agreed, the structural model, connection design and shop drawings follow. On existing plants, a site survey or photos of clash points avoid stairs that land in front of a valve handwheel or block an escape route.
Related engineering topics
steel structure design, structural calculations, steel platform FEA and structural steel detailing.
Frequently Asked Questions
Can you design a steel platform and staircase for our project?
Yes. We prepare calculations and drawings to AISC 360, OSHA and your project specification.
Do you take small jobs?
Yes. Single drawings, one calculation or a check of an existing design are welcome.
Which countries do you serve?
Saudi Arabia, UAE, Qatar, Oman, Kuwait, Bahrain and worldwide.
Related pages
Serving all GCC countries
Send your sketch, photo or PDF today
One drawing or a complete design package — we reply with a fixed-price quote, usually within 24 hours.
Request Engineering Support
Typical response within 24 hours · Confidentiality assured