Pressure Vessel Design – Calculations, 3D Model and Fabrication Drawings
Our pressure vessel design calculation packages take a process data sheet to a code-compliant vessel that an authorised inspector can review and a workshop can fabricate. Each package covers shell, heads, nozzles, flanges, supports and test pressure.
We design pressure vessels of all types with PV Elite / COMPRESS calculations, nozzle reinforcement, saddle and skirt checks, GA and fabrication drawings, and FEA where needed.
Also searched as: pressure tank, vessel drawing, vessel calculation.
Last updated:
Request Engineering Support
Typical response within 24 hours · Confidentiality assured
SLETEC portfolio
Project Evidence — ASME Vessels, Exchangers & Static Equipment
Selected engineering evidence from SLETEC projects. Client names and identifiers are withheld for confidentiality.
Scope
Vessels, separators, filters, reactors, exchangers, lifting devices
Codes
ASME VIII Div. 1 & 2 · TEMA · EN 13445 · PD 5500
Deliverables
Design calcs, data sheets, FEA and fatigue reports
What we deliver
Send us your data sheet, sketch or old drawing on WhatsApp (+966 55 545 8298) or email (enquiry@sletec.com) for a fixed-price quote, usually within 24 hours.
What an ASME VIII Div 1 calculation covers
Div. 1 uses design-by-rule, so the report walks through each rule in turn. Reviewers look for these checks by name, and we lay the report out so each one is easy to find.
| Check | What it confirms |
|---|---|
| Vessel thickness calculation (UG-27, UG-32) | Cylindrical shell and head thickness for internal pressure plus corrosion allowance |
| External pressure (UG-28) | Shell and stiffening rings under vacuum or jacket pressure |
| Nozzle reinforcement (UG-37, UG-45) | Area replacement around openings and minimum nozzle neck thickness |
| MDMT (UCS-66) | Whether impact testing is required at the minimum design metal temperature |
| Supports | Saddles by the Zick method, or skirt and base ring for wind and seismic |
| Hydrostatic test (UG-99) | Test pressure and the shell stress during the test |
Typical inputs
We work from the process data sheet: design pressure and temperature, volume, fluid, corrosion allowance, joint efficiency or radiography level, and the nozzle schedule. Site wind and seismic data, insulation, platform loads and any external nozzle loads complete the input. Missing items are listed as assumptions in the design basis rather than guessed silently.
What goes on the pressure vessel drawings
The GA shows design data, the nozzle schedule with orientation, weld details, test pressure and nameplate. Detail drawings cover nozzle projections, reinforcing pads, saddles or skirt, lifting lugs, internals and platform clips. Our pressure vessel local stress project shows the FEA we add when nozzle loads or supports fall outside rule-based limits.
How a vessel job runs
We confirm the design basis and code edition first, then issue the calculation and GA for comment. Once the nozzle orientation and supports are agreed, detail drawings and the bill of materials follow. Comments from your inspector or client are closed out in a revised issue with every change clouded and listed in the revision table.
Related engineering topics
pressure vessel design, static equipment design, nozzle local stress FEA and pressure vessel FEA ASME VIII Div 2.
Frequently Asked Questions
Can you design a pressure vessel for our project?
Yes. We prepare calculations and drawings to ASME VIII Div. 1 / Div. 2 and your project specification.
Do you take small jobs?
Yes. Single drawings, one calculation or a check of an existing design are welcome.
Which countries do you serve?
Saudi Arabia, UAE, Qatar, Oman, Kuwait, Bahrain and worldwide.
Related pages
Serving all GCC countries
Send your sketch, photo or PDF today
One drawing or a complete design package — we reply with a fixed-price quote, usually within 24 hours.
Request Engineering Support
Typical response within 24 hours · Confidentiality assured