Sheet Metal Design – Calculations, 3D Model and Fabrication Drawings
Our sheet metal design work produces parts that bend correctly the first time, because the flat pattern is built from the real material, thickness, bend radius and press brake tooling your shop uses. Typical work includes enclosures, guards, brackets, ducts, trays and cabinets.
We design sheet metal parts, enclosures and cabinets with flat patterns, bend details and DXF files ready for laser or CNC cutting.
Also searched as: sheet metal drawing, enclosure, panel.
Last updated:
Request Engineering Support
Typical response within 24 hours · Confidentiality assured
What we deliver
- Design calculations to ISO 2768
- 3D model
- General arrangement (GA) drawing
- Fabrication / shop drawings
- Bill of materials (BOM)
- FEA or other checks where needed
Send us your data sheet, sketch or old drawing on WhatsApp (+966 55 545 8298) or email (enquiry@sletec.com) for a fixed-price quote, usually within 24 hours.
What we need from your workshop
Flat patterns depend on the shop as much as the design. The same bend in the same material can need a different allowance on two different press brakes.
If you have a bend table or a known K-factor from trial bends, we use it directly. If not, we use typical values and mark the first-off part for checking.
- Material grade and thickness, and stock sheet size
- Punch radius and die opening available on the press brake
- Cutting method: laser, plasma, turret punch or shear
- Finish: powder coat, galvanised, stainless brushed or painted
- Fastening method: welding, rivets, self-clinching nuts or bolts
Flat pattern drawings and design rules
Several simple rules prevent most shop problems. The table lists the main ones we check before a drawing is issued.
| Rule | Why it matters |
|---|---|
| Bend allowance and K-factor | Gives the correct flat length so formed dimensions come out right |
| Minimum flange length | Flanges shorter than the die allows cannot be formed accurately |
| Bend relief | Stops tearing where a bend meets an edge |
| Hole-to-bend distance | Prevents holes distorting into ovals during forming |
| General tolerances (ISO 2768) | Sets realistic tolerances where no specific tolerance is shown |
| Enclosure rating (IEC 60529) | Seals, gaps and gland plates for the required IP rating |
Sheet metal drawings we issue
Each part gets a formed drawing with bend lines, bend directions and inside radii, plus a flat pattern with overall blank size. DXF files are supplied for cutting, and assemblies come with an exploded view and a parts list so welding and fitting can be planned.
Problems we fix on existing designs
Common issues are parts drawn as solid models with no flat pattern, bends placed too close to holes, flanges too short to form, and enclosures that leak because gasket compression was never designed. We convert such parts into proper sheet metal models and drawings. See our fabrication drawings service for related scope.
How a sheet metal job runs
You send a sketch, sample or existing drawing with your shop's tooling data. We build the sheet metal model, issue formed and flat drawings for review and adjust bend data if the first part off the brake differs. Final DXF files are named to match drawing numbers, so the cutting operator always picks the right revision.
Related engineering topics
mechanical design services, skid design, skid base frame design and machine design services.
Frequently Asked Questions
Can you design a sheet metal for our project?
Yes. We prepare calculations and drawings to ISO 2768 and your project specification.
Do you take small jobs?
Yes. Single drawings, one calculation or a check of an existing design are welcome.
Which countries do you serve?
Saudi Arabia, UAE, Qatar, Oman, Kuwait, Bahrain and worldwide.
Related pages
Serving all GCC countries
Send your sketch, photo or PDF today
One drawing or a complete design package — we reply with a fixed-price quote, usually within 24 hours.
Request Engineering Support
Typical response within 24 hours · Confidentiality assured