CFD Engineering

CFD Simulation Services in Saudi Arabia

Computational fluid dynamics simulation for flow optimisation, heat transfer, HVAC, and process equipment analysis across oil & gas and industrial projects in KSA.

SLETEC Engineering delivers computational fluid dynamics (CFD) simulation services for engineering projects across Saudi Arabia. Using ANSYS Fluent and CFX, our CFD engineers model fluid flow, heat transfer, and mass transport phenomena to predict equipment performance, identify design risks, and support optimisation decisions before physical construction or procurement. CFD is a cost-effective tool for validating process designs and avoiding expensive rework.

Our CFD capabilities cover a broad range of industrial applications: single-phase and multiphase flow in process vessels and piping, shell-and-tube and air-cooled heat exchanger thermal performance, HVAC room airflow and ventilation effectiveness, pressure drop prediction in complex piping geometries, flow-induced vibration risk screening, and gas dispersion modelling for safety studies. Each simulation is set up with engineering-grade mesh quality, validated turbulence models, and boundary conditions derived from actual process data.

Results from SLETEC CFD studies are delivered in a structured technical report format, including geometry description, mesh quality metrics, solver setup, convergence assessment, and detailed visualisation of flow fields, temperature distributions, and pressure maps. Our reports are written to support engineering decision-making and are suitable for client submission and third-party technical review.

Engineering documentation prepared with reference to API, ASME, AISC, AWS, ISO, Saudi Aramco, SABIC and client project specifications where applicable.

Request Engineering Support

Typical response within 24 hours · Confidentiality assured

Analysis Methods

What each analysis checks, and the code or criteria it is assessed against.

Analysis typeWhat it checksTypical code / criteria
Linear & non-linear staticStress, deformation, plastic collapse, local stress at nozzles and supportsASME VIII Div. 2 Part 5, WRC 107/537
BucklingShell, roof and structural stability under external pressure, wind and vacuumAPI 650, ASME VIII, EN 1993
Modal & harmonicNatural frequency, mode shape and forced response of skids, platforms and equipmentProject criteria, OEM limits
Fatigue & creepCyclic pressure, thermal and nozzle loads; weld fatigue; high-temperature creepASME VIII Div. 2, EN 13445
Explicit dynamicsHigh-velocity impact, penetration and erosion; drop and crash eventsAnsys Explicit Dynamics
Thermal-mechanicalTemperature fields and thermal stress in coolers, drives and furnace componentsProject specification
CFDPressure drop, velocity fields, venting, transient flow and silo dischargeProject specification
Fitness-for-serviceDamage assessment, bulging, corrosion and remaining-life evaluationAPI 579-1 / ASME FFS-1

Software tools: Ansys Workbench (Mechanical, Explicit Dynamics) · Ansys SpaceClaim · LS-DYNA · STAAD.Pro · SACS · ETABS · SAFE · Tekla · MIDAS · 3D CAD and 2D drafting tools to client requirements · hand calculations and code-based spreadsheets for independent verification

Types of CFD we perform

Internal flow CFD

flow simulation inside pipes or equipment

Pressure drop and flow distribution CFD

pressure drop calculation by simulation

Conjugate heat transfer CFD

heat flow simulation

Multiphase flow CFD

oil, gas and water mixture flow

Agitator and mixing CFD

mixing tank simulation

Separator and vessel internals CFD

separator internals simulation

HVAC and ventilation CFD

air flow / ventilation simulation

Gas dispersion CFD

gas leak spread

Erosion CFD

wear by sand or particles

Sloshing analysis

liquid moving in a tank

Silo flow and pressure CFD / DEM

powder or grain flow in a silo

Turbomachinery flow CFD

fan, pump or blower flow

External aerodynamics / wind load CFD

wind flow around structures

Fluid–structure interaction (FSI)

fluid–structure check

Industries

Oil & gas, petrochemical, refinery, power, water and desalination, cement, mining, HVAC and manufacturing – across Saudi Arabia, UAE, Qatar, Oman, Kuwait and Bahrain.

SLETEC portfolio

Project Evidence — Piping, Plant Layout & CFD

Selected engineering evidence from SLETEC projects. Client names and identifiers are withheld for confidentiality.

CFD Velocity FieldTransient velocity distribution and process-flow review during silo loading.
CFD Pressure-Drop ReviewTransient pressure field for a vent return pipe and silo response, time-stepped.
Particle Flow & Silo DischargeMaterial recirculation, discharge behaviour and unloading validation.
CFD Mesh BasisComputational grid for the silo vent return pipe system.

Scope

Layouts, supports, flexibility, waterhammer, CFD pressure drop

Codes

ASME B31.3 · ASME B31.1 · ISO 14692

Deliverables

Stress reports, support details, isometrics, CFD reports

Case study · Ref. 05 · CFD

Silo Top-Filter Congestion Risk

Challenge: Check whether material recirculation during loading could congest the silo top filter.

Approach: Transient CFD with particle tracking of the loading process and recirculation review.

Outcome: No material recirculation at the silo top — the top filter is safe from particle congestion.

Service Capabilities

Single-phase internal flow analysis in ducts, vessels, and piping systems
Multiphase flow simulation — gas-liquid, liquid-liquid, solid-liquid
Heat exchanger thermal performance CFD — shell-and-tube, air-cooled, plate type
HVAC room airflow, ventilation effectiveness, and thermal comfort analysis
Pressure drop prediction in complex pipe geometries and fittings
Gas dispersion and hazardous area extent modelling
Combustion and fired heater furnace simulation
Parametric CFD studies for design optimisation

Deliverables Produced

CFD Technical Report with Model and Boundary Condition Description
Mesh Quality Summary and Convergence History
Flow Visualisation Plots — Velocity, Pressure, Temperature, Streamlines
Quantitative Results Summary — Heat Duty, Pressure Drop, Flow Distribution
Design Comparison Reports for Optimisation Studies
CFD Model Files (ANSYS Fluent/CFX case files)

Standards Referenced

ASME PTC 12.5 (Heat Exchangers) TEMA Standards ASHRAE 55 / 62.1 (HVAC) API 521 (Pressure Relieving) Client Project Specifications

Software Used

ANSYS Fluent ANSYS CFX ANSYS Meshing SolidWorks Flow Simulation SpaceClaim (Geometry Prep) Microsoft Excel (Results Post-processing)

Industries Served

Oil & Gas Petrochemical Refinery Power Generation HVAC & Buildings Water Treatment Offshore & Marine

Why Choose SLETEC

ANSYS-based CFD simulations with engineering-grade mesh quality, validated turbulence models, and process-accurate boundary conditions.

Structured technical reports written for engineering decision support — not just colourful pictures, but quantitative results and clear conclusions.

Experience in both equipment-level CFD (heat exchangers, vessels) and facility-level CFD (HVAC, ventilation, dispersion).

CFD used in combination with analytical calculations and FEA for a comprehensive engineering validation approach.

Fast turnaround on standard CFD cases — suitable for project schedules with tight design review windows.

Frequently Asked Questions

What CFD simulation services does SLETEC provide in Saudi Arabia?

SLETEC provides CFD simulation for single-phase and multiphase flow analysis, heat exchanger thermal performance studies, HVAC room airflow and ventilation analysis, pressure drop calculations in piping networks, combustion and furnace modelling, and dispersion analysis for gas release scenarios in oil & gas and industrial facilities.

What CFD software does SLETEC use for simulation in KSA?

SLETEC primarily uses ANSYS Fluent and ANSYS CFX for industrial CFD simulations. For HVAC and building airflow studies, we also use SolidWorks Flow Simulation. All simulations are validated against applicable analytical methods and published benchmark data where available.

Can CFD simulation help optimise heat exchanger designs?

Yes. CFD simulation is a powerful tool for evaluating heat exchanger thermal performance, identifying flow maldistribution, studying fouling-prone zones, and comparing design variants. SLETEC uses CFD to supplement analytical calculations and validate shell-and-tube and plate heat exchanger designs.

How are CFD results reported by SLETEC?

SLETEC delivers a comprehensive CFD report including geometry description, mesh quality summary, boundary conditions, solver settings, convergence history, flow visualisation plots (velocity, pressure, temperature contours, streamlines), and a quantitative summary of key results with engineering interpretation.

What is CFD?

CFD (computational fluid dynamics) is a computer simulation of how liquids, gases and heat move inside or around equipment.

When do I need CFD?

When you need to see flow, pressure drop, mixing, heat transfer, erosion or sloshing that hand calculations cannot predict.

Do you serve all GCC countries?

Yes. We serve Saudi Arabia, UAE, Qatar, Oman, Kuwait and Bahrain, mostly by email and WhatsApp, with site visits when needed.

Ready to Start Your Engineering Project?

Our engineering team is ready to review your scope, discuss deliverables and submit a competitive proposal within 24 hours.

WhatsApp Us Request Similar Engineering Support